San Juan Desert Springs Fiberglass Pool & Spa in Deltona, FL

Southern Construction built this San Juan Desert Springs fiberglass pool with an attached spa in Deltona in 2019: 30′ x 14′, about 7,120 gallons, a gas heater, a cantilever concrete deck with an acrylic knockdown finish, color LED lights, deck jets and landscape lighting. Start to finish, it took 8 weeks. We are family owned and operated, licensed (CPC 1461713), and building in Central Florida since 2005. Call 386-574-7567 or request a free estimate.

Fiberglass pool with deck jets and new landscaping in Deltona, Florida — Landscaped and running, with the deck jets on

In this Deltona backyard we installed a San Juan Desert Springs fiberglass pool with an attached spa, added a gas heater so the spa is hot year-round, and poured a concrete deck with a cantilever edge and acrylic knockdown finish out to the covered lanai. Color LED lights, deck jets and landscape lighting finish it at night. Southern Construction handled the whole job, start to finish, in 8 weeks (2019).

At a glance

Location	Deltona, Florida (West Volusia)
Project	Fiberglass pool with attached spa, concrete deck, LED lighting
Shell	San Juan Desert Springs: 30' x 14' outside, 6'1" deep, about 7,120 gallons, attached spa, tanning ledge, bench seating
Heat	Gas heater for the pool and spa
Deck	Poured concrete deck with a cantilever edge and acrylic knockdown finish, tied in to the existing lanai
Extras	Color LED pool and spa lights, deck jets, landscape lighting
Timeline	8 weeks, start to finish (built 2019)

Watch the full install

The full installation of this pool, start to finish

How we built it

Shell set. The San Juan Desert Springs shell went into a fenced Deltona backyard and was set level on a prepared base.
Plumbing. Main drain, skimmer, returns, spa jets and deck jet lines were run and stubbed up before backfill.
Tile. Porcelain waterline tile went on around the pool, with glass mosaic on the spa's spillover dam.
Deck forms. Cantilever forms went around the shell edge so the deck rolls over the top of the pool wall.
Concrete pour. The deck was pumped and finished in one pour, tied in to the covered lanai, then saw-cut for control joints.
Deck finish and equipment. The deck got an acrylic knockdown finish, cooler underfoot than bare concrete, and the gas heater and pool equipment were set and connected.
Startup. Fill, start-up, LED pool lights, deck jets and landscape lighting on.

Construction photos

San Juan Desert Springs fiberglass pool shell with attached spa set in a Deltona backyard — The San Juan Desert Springs shell, delivered and set

Fiberglass pool shell set level with plumbing stubbed up in a Deltona backyard — The San Juan Desert Springs shell, delivered and set

The finished pool

Acrylic knockdown concrete deck around a San Juan Desert Springs fiberglass pool — The finished deck with its cantilever edge

Concrete pool deck tied in to a covered lanai — The finished deck with its cantilever edge

The finished pool and spa at dusk, LED lights and deck jets running

Why the Desert Springs

Pool and spa in one shell: the spa is molded in, so there’s no separate spa to build
Tanning ledge and benches built into the shell

Thinking about a pool in Deltona?

We build fiberglass pools and spas across West Volusia, including Deltona, DeLand, Orange City and DeBary. Southern Construction is family owned and operated, licensed (CPC 1461713), and has been building in Central Florida since 2005. Get a free estimate. See another Deltona build: our Desert Springs pool and spa with a Rico Rock waterfall.